天津汽车滤清器(链板线)装配线技术参考案例

一、汽车滤清器(天津链板线,天津链板流水线,天津链板输送线)天津装配线设计依据：

1、本产品尺寸：长×宽×高=5500×294×650mm；

2、本产品更大负载重量：40kg/米；

3、电源：单相220V；三相380V；

4、环境条件：湿度60%，温度： -10℃－40℃。

二、汽车滤清器(天津链板线,天津链板流水线,天津链板输送线)天津装配线体主要配置及技术参数：

1、此板链线长5500mm，线体总宽294mm，线体输送面高度650mm；

2、 此线体机架采用江苏华西村牌40*40铝型材，动力架采用上海宝钢40*40mm方管焊接和3mm铁板折弯制成，表面喷塑处理，用于固定电机、驱动链轮等线体动力部分配件； 

3、输送链板尺寸为200mm*50mm，采用上海宝钢2mm优质冷板折弯制成，表面镀锌处理；

4、输送链条为宁波动力链条，节距为P=50.8mm；

5、线体上层导轨采用40*63角铁，下层导轨采用5#角铁；

6、线体侧封板采用上海宝钢2mm铁板折弯制成；

7、电机采用0.4KW晟邦一体机，松下变频器变频调速，调速范围0.5-5m/min。

三、汽车滤清器(天津链板线,天津链板流水线,天津链板输送线)天津装配线体主要技术要求：

1、汽车滤清器(天津链板线,天津链板流水线,天津链板输送线)天津装配线体：主体支架要求拼接正规；

2、汽车滤清器(天津链板线,天津链板流水线,天津链板输送线)天津装配线体：结构结实耐用，外观整洁美观；电器控制准确灵敏；

3、汽车滤清器(天津链板线,天津链板流水线,天津链板输送线)天津装配线体：碳钢部分表面喷塑，其余铁质配件为电脑色。

1. Design basis for the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):

1. The size of this product: length×width×height=5500×294×650mm;

2. The maximum load weight of this product: 40kg/m;

3. Power supply: single-phase 220V; three-phase 380V;

4. Environmental conditions: humidity 60%, temperature: -10℃-40℃.

2. The main configuration and technical parameters of the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):

1. The length of the plate chain is 5500mm, the total width of the line body is 294mm, and the height of the line body conveying surface is 650mm;

2. The wire frame is made of 40*40 aluminum profile of Jiangsu famous brand Huaxi Village brand, and the power frame is made of Shanghai Baosteel 40*40mm square tube welding and 3mm iron plate bending, and the surface is sprayed with plastic to fix the motor and drive. Sprocket and other line body power part accessories;

3. The size of the conveyor chain plate is 200mm*50mm, which is made of 2mm high-quality cold plate of Shanghai Baosteel, and the surface is galvanized;

4. The conveying chain is a Ningbo power chain with a pitch of P=50.8mm;

5. The upper guide rail of the line body adopts 40*63 angle iron, and the lower guide rail adopts 5# angle iron;

6. The side sealing plate of the wire body is made by bending 2mm iron plate of Shanghai Baosteel;

7. The motor adopts 0.4KW Shengbang integrated machine, Panasonic inverter frequency conversion speed regulation, and the speed regulation range is 0.5-5m/min.

3. The main technical requirements for the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):

1. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: the main body bracket requires regular splicing;

2. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: strong and durable structure, neat and beautiful appearance; accurate and sensitive electrical control;

3. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: part of the surface of carbon steel is sprayed with plastic, and the rest of the iron parts are computer-colored.